The Carbine Exodus Panic Exit Bar (CPE-R-F-3) is a single-sided, single-point, non-dogging push bar for commercial single doors, built from 304-grade stainless steel. It suits doors from 660mm to 914mm wide and gives building occupants a simple, one-push exit.
With single-point latching and a reversible design to suit the door handing, it is a practical choice for exit doors in offices, warehouses, schools, retail and other commercial premises where a robust, easy-to-operate escape fastening is needed.
Hardware Applications & Features
The Exodus CPE-R-F-3 is designed for single exit doors where single-point latching and simple escape-side operation are required:
➔ Single-Point Latching: Single-point locking for single doors, a simpler fit than two-point top and bottom bars because it needs no vertical rods running up and down the door.
➔ Non-Dogging Operation: The non-dogging (“F”) model has no hold-back function, so the bar always relatches when the door closes. Carbine states all non-dogging models carry a two-hour fire-rated certification.
➔ 304 Stainless Steel Construction: Carbine builds the Exodos range from 304-grade stainless steel, tested to 100,000 openings without failure and salt spray exposure for up to 96 hours.
➔ Escape-Side Push Bar: A single-sided push bar fitted to the inside of the door so occupants can exit with a single push. Carbine supplies a “Push bar to open” sticker with every unit.
➔ Reversible Design: Reversible for easy installation, so the same bar can be set up to suit the door handing on site.
➔ Optional Outside Access: Carbine offers optional accessories for this range, including an external rim cylinder pull plate and an external lever (classroom function, half euro cylinder). Accessories are quoted separately.
Technical Architectural Parameters
Hardware Metric
Verified Component Dimension / Spec
Product Range
Carbine Exodos Panic Exit Bar.
Model / SKU
CPE-R-F-3.
Configuration
Single door, single-point locking.
Operation
Non-dogging (no hold-back); push bar to open.
Bar Size
3-foot bar.
Door Width Range
660mm – 914mm wide doors.
Minimum Door Thickness
45mm.
Material
304-grade stainless steel.
Durability Testing
100,000 openings without failure; salt spray tested for up to 96 hours (Carbine range testing).
Fire Rating
Two-hour fire-rated certification stated by Carbine for all non-dogging models.
Installation
Reversible design to suit door handing.
Included
“Push bar to open” sticker.
Compliance & Fire Door Fitting
Whether panic hardware is required, and which type, depends on the building’s use, occupant numbers and escape route design under the New Zealand Building Code (C/AS2 Section 3.9 covers doors on escape routes), so please confirm requirements with your fire engineer or Building Consent Authority where applicable.
If the door is a fire door, the fire door manufacturer must approve this hardware in writing before it is fitted. We are happy to propose options and install once that approval is in hand.
Carbine Exodus Panic Exit Bar – Single Sided – Stainless Steel (CPE-R-F-3)
$616.09 incl gst
Description
The Carbine Exodus Panic Exit Bar (CPE-R-F-3) is a single-sided, single-point, non-dogging push bar for commercial single doors, built from 304-grade stainless steel. It suits doors from 660mm to 914mm wide and gives building occupants a simple, one-push exit.
With single-point latching and a reversible design to suit the door handing, it is a practical choice for exit doors in offices, warehouses, schools, retail and other commercial premises where a robust, easy-to-operate escape fastening is needed.
Hardware Applications & Features
The Exodus CPE-R-F-3 is designed for single exit doors where single-point latching and simple escape-side operation are required:
➔ Single-Point Latching: Single-point locking for single doors, a simpler fit than two-point top and bottom bars because it needs no vertical rods running up and down the door.
➔ Non-Dogging Operation: The non-dogging (“F”) model has no hold-back function, so the bar always relatches when the door closes. Carbine states all non-dogging models carry a two-hour fire-rated certification.
➔ 304 Stainless Steel Construction: Carbine builds the Exodos range from 304-grade stainless steel, tested to 100,000 openings without failure and salt spray exposure for up to 96 hours.
➔ Escape-Side Push Bar: A single-sided push bar fitted to the inside of the door so occupants can exit with a single push. Carbine supplies a “Push bar to open” sticker with every unit.
➔ Reversible Design: Reversible for easy installation, so the same bar can be set up to suit the door handing on site.
➔ Optional Outside Access: Carbine offers optional accessories for this range, including an external rim cylinder pull plate and an external lever (classroom function, half euro cylinder). Accessories are quoted separately.
Technical Architectural Parameters
Compliance & Fire Door Fitting
Whether panic hardware is required, and which type, depends on the building’s use, occupant numbers and escape route design under the New Zealand Building Code (C/AS2 Section 3.9 covers doors on escape routes), so please confirm requirements with your fire engineer or Building Consent Authority where applicable.
If the door is a fire door, the fire door manufacturer must approve this hardware in writing before it is fitted. We are happy to propose options and install once that approval is in hand.
Related products
Lockwood 1 Point FLUID Panic Exit Device 1200mm
SKU: FE112/0HSIL
$1326.82 incl gstDorma PHB Single Point Panic Device
SKU:
$660.00 – $810.00Price range: $660.00 through $810.00 incl gstVon Duprin VD230L Lever (less cylinder)
SKU: VDD55011
$580.00 incl gst